GME CP30 - Page 23

19
CP30 INSTRUCTION MANUAL
• Squelch level 1 is the most sensitive setting. It will allow the Squelch
to open on very weak signals but it will also be more sensitive to
unwanted signals or local interference.
• Squelch level 9 is the least sensitive setting. Your radio will be less
aected by local interference but incoming signals will need to be much
stronger to open the squelch.
The default Squelch setting on the CP30 is 3 which should suit most conditions.
The squelch level can be adjusted from by pressing the Channel Selector knob
(default setting) or via the radio menu.
To adjust the Squelch level from the Channel Selector knob:
1. Press the Channel Selector knob. SQLCH will be displayed along with
the present squelch level setting.
2. Rotate the Channel Selector knob to adjust the squelch level from 1 to 9.
3. When the desired setting is displayed, press the Channel Selector
knob or wait a few seconds for the menu to time-out to save and return
to normal operation.
To adjust the Squelch level from the Menu:
1. Hold the
MENU
F
key to access the menu. The last selected menu item
will be displayed.
2. Rotate the Channel Selector knob
or press the keys until
SQLCH is displayed.
3. Press the
MENU
F
key.
4. Rotate the Channel Selector knob
or press the keys to adjust
the squelch level from 1 to 9.
5. When the desired setting is
displayed, press the
MENU
F
key to exit
the menu or wait a few seconds for
the menu to time-out.