GME CP30 - Call Menu

51
CP30 INSTRUCTION MANUAL
The following characters are available for use in Alpha Names.
PUNCTUATION NUMBERS LETTERS
– + * , _ 1 2 3 4 5 6 7 8 9 0 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Call Menu
The CALL menu provides access to all SelCall options. To access the SelCall
options:
1. Press the
CALL
LOCK
key. The SelCall sub-menu will be displayed.
2. Rotate the Channel Selector knob or press the keys to cycle
through the following sub-menu options:
• SAVED: Review, Edit or Save SelCall Idents in your contact list
• OWNID: Review or Edit your radio’s own SelCall Ident
• DIAL: Manually enter a SelCall Ident for sending
• RECNT: Recall recently received or sent SelCall Idents
Editing Your Own SelCall Ident
Your radio is shipped with its own unique 5 digit SelCall ID already programmed. If
you wish you can change this to one of your own preference.
Note the new Ident you choose must have 5 digits.
1. Press
CALL
LOCK
to enter the CALL Menu.
2. Rotate the Channel Selector knob or press the keys to cycle
to the OWNID option then press
MENU
F
to select. ID is displayed along
with your radio’s Ident or Alpha name.
3. Press
MENU
F
to toggle between Ident and Alpha mode to select the
Ident then hold
MENU
F
. The right-hand digit will be ashing.
4. Rotate the Channel Selector knob or press the keys to select
the desired number in the ashing digit position.
5. Press
MENU
F
to advance to the next position.
6. Repeat steps 4 & 5 to enter all 5 digits of your new SelCall Ident, then
hold
MENU
F
to save. The Ident will ash 3 times to conrm it has been
saved.
7. To edit the Alpha Name, briey press
MENU
F
to toggle to the Alpha
mode then hold
MENU
F
. The left-hand character will be ashing.