GME CP30 - Silent Squelch Tail

CP30 INSTRUCTION MANUAL
30
To Select the Narrowband Filter:
1. Hold the
MENU
F
key to access the menu. The last selected menu item
will be displayed.
2. Rotate the Channel Selector knob or press the keys until
NBFILT is displayed.
3. Press the
MENU
F
key.
4. Rotate the Channel Selector knob or press the keys to select
ON or OFF.
5. When the desired setting is displayed, press the
MENU
F
key to exit the
menu or wait a few seconds for the menu to time-out.
Silent Squelch Tail
The Squelch Tail is the short burst of noise that is heard in the speaker at the
end of a transmission before the Squelch closes. To some it is a reassuring
conrmation that it is their turn to transmit but in some applications it may be an
annoyance especially when listening through an earpiece or headphones.
The Silent Squelch Tail function removes this Squelch tail, reducing it to a faint
click as the Squelch closes.
To Enable or Disable the Silent Squelch Tail:
1. Hold the
MENU
F
key to access the menu. The last selected menu item
will be displayed.
2. Rotate the Channel Selector knob or press the keys until
SQLTAIL is displayed.
3. Press the
MENU
F
key.
4. Rotate the Channel Selector knob or press the keys to select
ON or OFF.
5. When the desired setting is displayed, press the
MENU
F
key to exit the
menu or wait a few seconds for the menu to time-out.