GME CP30 - Pro Key; Pro Key Assignments

CP30 INSTRUCTION MANUAL
24
To Enable Or Disable Duplex on a Repeater Channel
1. Select the required channel 1–8 or 4–48.
2. Look for the Duplex icon on the left of the display.
i. If the icon is visible, Duplex is currently enabled on the
selected channel. To disable Duplex operation, press
MENU
F
then
PRO
DUP
. The icon will disappear. The channel is now
operating in Simplex mode.
ii. If the icon is NOT visible, the selected channel is not
enabled for duplex operation. To enable Duplex, press
MENU
F
then
PRO
DUP
. The icon will appear. The channel is now
operating in Duplex mode.
Pro Key
As covered in the Dual Watch and Triple Watch section, the default settings for
the
PRO
DUP
key are Dual Watch (press) and Triple Watch (hold).
The
PRO
DUP
key is a programmable key that can be used to provide a shortcut to
other user-assigned functions. Once a function has been assigned, pressing the
PRO
DUP
key will immediately activate that function.
To Assign a Function to the PRO key:
1. Hold the
MENU
F
key to access the menu. The last selected menu item
will be displayed.
2. Rotate the Channel Selector knob or press the keys until
PROKEY is displayed.
3. Press the
MENU
F
key.
4. Rotate the Channel Selector knob or press the keys to select
from AUDIO, DW/TW, SQLLVL, DISP, RECALL, PWRSAV or BEEP
(see list below for details).
5. When the desired function is displayed, press the
MENU
F
key to exit the
menu or wait a few seconds for the menu to time-out.
Pro Key Assignments
A summary of possible
PRO
DUP
key assignments are as follows. For further details
about the specic function mentioned, refer to corresponding section of this
instruction manual.