GME CP30 - Radio Information

CP30 INSTRUCTION MANUAL
36
• Select OFF to switch the Power Save function O. The radio will
remain active at all times and will draw the most amount of power
from the battery.
• Select LO to enable the Power Save function at a conservative
setting. The radio will sleep during periods of inactivity but will
respond quickly to incoming signals.
• Select HI to enable the Power Save function at a more aggressive
setting. The radio will conserve the most amount of power but
may not be as responsive to incoming signals.
5. When the desired setting is displayed, press the
MENU
F
key to exit the
menu or wait a few seconds for the menu to time-out.
For additional tips on conserving power please read the section “Conserving your
Battery Power” later in this manual.
Radio Information
The menu has an INFO option to provide hardware, rmware and identity
information about your radio.
To View Your Radio Information:
1. Hold the
MENU
F
key to access the menu. The last selected menu item
will be displayed.
2. Rotate the Channel Selector knob or press the keys until
INFO is displayed. Press the
MENU
F
key to access the sub-menu.
3. Rotate the Channel Selector knob or press the keys to select
one of the available sub-menu options. MODEL, SERNO, FWVER,
HWVER, or OWNID will be displayed. (See list below for details).
4. With the desired option displayed, press the
MENU
F
key to view the
selected information.
5. Hold the
MENU
F
key to return to the sub-menu or press the
MENU
F
key to
exit and return to normal operation.
Available INFO Options
• MODEL: Displays your radio’s model name.
• SERNO: Displays your radio’s serial number.
• FWVER: Displays your radio’s rmware (operating software) version.
• HWVER: Displays your radio’s hardware (PCB assembly) version.
• OWNID: Displays your radio’s own SelCall Ident.