37
CP30 INSTRUCTION MANUAL
Factory Reset
The CP30 has a factory reset option that allows you to restore the radio back to its
out-of-the-box settings. Activating the factory reset will delete any changes you
have made to the radio including any receive-only channels, scan memories and
CTCSS/DCS settings and will reset all the menu settings to their defaults.
To Activate the Factory Reset Procedure:
1. Hold the
MENU
F
key to access the menu. The last selected menu item
will be displayed.
2. Rotate the Channel Selector knob or press the keys until
RESET is displayed then press
MENU
F
.
3. The channel number will change to – – – and RESET? HOLD SIDE-
BOTTOM will scroll on the display.
4. Hold the Side-Bottom button (below the PTT Key) for several
seconds until the radio beeps.
5. RESET? HOLD TOP RED BUTTON will scroll on the display.
6. Hold the top RED button for several seconds until the radio beeps.
7. RESET will again be displayed and the status LED will ash red as the
reset process begins. After a few seconds the radio will restart and
normal operation will be restored on CB channel 1.
To Next Page
Loading...
