GME CP30 - Private and Receive-Only Channels

63
CP30 INSTRUCTION MANUAL
PRIVATE AND RECEIVE-ONLY CHANNELS
The CP30 supports up to 119 private channels. These may be transmit channels in
the frequency range 450–520 MHz (dealer programmable) or receive-only channels
in the frequency range 403–520 MHz (user programmable). When enabled these
additional channels are located directly above CB channel 80 (81–199). Each
private or receive-only channel can also be assigned an Alpha label to help identify
that channel. Private (transmit) channels must be programmed using the Dealer
Programmer (Contact your Authorised GME Commercial dealer). Receive only
channels can be programmed through the radio’s menu.
To Access the Receive-Only Channel Sub-Menu
1. Hold the
MENU
F
key to access the menu. The last selected menu item
will be displayed.
2. Rotate the Channel Selector knob or press the keys until
CHAN is displayed.
3. Press the
MENU
F
key to enter the CHAN sub-menu. ADD is displayed.
4. Rotate the Channel Selector knob or press the keys to select
one of the available sub-menu options. ADD, REMOVE, TYPE,
NAME, RXFRQ, TXFRQ, RXTONE, TXTONE, TXPWR, BSYLK, or
SelCall will be displayed.
5. With the desired option displayed, press the
MENU
F
key to select it.
The Following Sub-Menu Options are Included:
ADD:
• A new receive-only channel. A new channel number is created above
channel 80. Once you have created a new channel number you can
use the RXFREQ option to program the frequency.
• Private channels must be added using the Dealer Programmer.
REMOVE:
• Deletes a receive only channel.
• Private channels must be removed using the Dealer Programmer.