GME CP30 - Page 58

CP30 INSTRUCTION MANUAL
54
Sending a SelCall From Your Contact List
1. Press
CALL
LOCK
to enter the CALL Menu.
2. Rotate the Channel Selector knob or press the keys to cycle
to the SAVED option then press
MENU
F
to select.
3. Press the keys to cycle to the desired SelCall ID in your contact
list.
4. With the desired contact displayed, hold the
CALL
LOCK
key. The radio will
transmit the SelCall Ident.
Sending a SelCall From Your Recent List
The Recent List contains a list of recently received SelCalls. You can use this list to
return a call or simply view who has called you.
1. Press
CALL
LOCK
to enter the CALL Menu.
2. Rotate the Channel Selector knob or press the keys to the
RECNT option then press
MENU
F
to select.
3. Press to cycle through the Recent List.
4. While viewing recent callers, press
MENU
F
to switch between Ident
mode and Alpha mode. If the selected caller is in your contact list, the
Alpha Name should be viewable. If the caller is not in your contacts,
only the Ident will be displayed.
5. To respond to the caller, hold the
CALL
LOCK
key. The radio will transmit the
selected SelCall.
Resending the Last SelCall
To make another call to the last sent SelCall contact simply hold the
CALL
LOCK
key. The
radio will transmit the most recently sent SelCall Ident.
Manually Dialling a SelCall Ident
There may be times when you want to send a SelCall to someone without storing
them in your contact list.
1. Press
CALL
LOCK
to enter the CALL Menu.
2. Rotate the Channel Selector knob or press the keys to cycle
to the DIAL option then press
MENU
F
to select.
3. The last sent or received SelCall Ident will be displayed with the right-
hand digit ashing.