Go-Video DDV9550 User Manual

2 DDV9550 USER’S GUIDE
IN
(FROM ANT.)
RF
OUT
(TO TV)
R
AUDIO
L
VIDEO
LINE
OUT
CH
3 4
IN
(FROM ANT.)
RF
OUT
(TO TV)
R
AUDIO
L
VIDEO
LINE
OUT
CH
3 4
Connect Antenna to VCR
Connect the RF antenna cable from your
indoor/outdoor antenna or cable wall
outlet to the IN (FROM ANT.) jack on the
back panel of the VCR.
Connect VCR to TV
Connect the supplied RF cable from the
OUT (TO TV) jack on the back panel of the
VCR to your television’s ANTENNA IN
jack.
Set VCR Output Channel
Set the channel switch on the back panel of
the VCR to 3 or 4, whichever is not an
active channel in your area.
Plug In VCR
Connect the VCR power cord to a standard
120V/60Hz wall outlet.
Connect Antenna/Basic Cable
1
2
3
Follow these steps only if you
are using an indoor/outdoor
antenna or basic cable. If you
have a:
• Cable Box
• Stereo Receiver
• TV Monitor
• Third VCR
• Laserdisc Player
• DVD Player
• Camcorder
• Satellite Receiver
• Video Game
...or other advanced connection,
please refer to Chapter 11.
4
From Antenna
or Cable
To TV
CH
3 4

Go-Video DDV9550 Specifications

General

Brand	Go-Video
Model	DDV9550
Category	VCR
Language	English