Go-Video DDV9550 User Manual

64 DDV9550 USER’S GUIDE
Tape Missing
No videotape in recording deck.
• Insert a videotape in the recording deck.
Tape Missing Tab
No record safety tab in videocassette.
• Insert a video cassette with the record
safety tape intact, or place a small piece
of adhesive tape over the opening to
permit recording.
Not Ready
The recording Deck is not in Stop mode
(i.e. it is playing, rewinding, etc.).
• Press Stop to stop the recording deck.
Timer Recording Errors
If there is a problem with your
Timer Recording, the word
Timer will flash on the Front
Panel Display and an error
message will appear on the
On-Screen Display. Once you
correct the error, the event will
begin if there is still time
remaining for that event.
Copy Tape
Hi-Fi
Deck
Hi-Fi
Deck
DDV9550
Power
Deck SelectRecordRewind Play F. ForwardPauseStop / Eject
Record Safety Tab
DECK1
DECK2
MENU
0
0
0
0
9
A
/
¥
E
N
T
E
R
TIMER EVENTS OVERLAP
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16
Please review the events
from the Select Event
menu and remove one
using the CLEAR key
_____________________________________
MENU to Continue
Overlapping Events
Two or more events are programmed to occur at
the same time:
• When you program a new event, the VCR
checks all timer events for conflicts. If two
events overlap, you will be prompted to either
delete one of the events, or allow them to
overlap.
• If events overlap, the first event will be com-
pletely recorded, then the next event starts and
the remainder of that event is recorded.
SELECT EVENT [1-16]:01
1 10:30 PM On Wednesdays
1H30M Ch10 Deck1 Auto
2 : 9:00 AM On Sun Dec/06
0H30M Line1 Deck2 SP
3 : 7:00 PM On Mon-Fri
2H00M Line2 Deck2 SLP
4 : 12:15 PM On Everyday
0H15M Ch06 Deck1 Auto
/ = Move = Sel MENU=Quit
➔
➔
➔
➔

Go-Video DDV9550 Specifications

General

Brand	Go-Video
Model	DDV9550
Category	VCR
Language	English