Goodman *CVC96 - Furnace Advanced Features Menus; Configuration; Diagnostics

44
FURNACE ADVANCED FEATURES MENUS
(accessed through the communicating thermostat)
Submenu Item Indication (for Display Only; not User Modifiable)
Number of Heat Stages (HT STG) Displays the number of furnace heating stages
Input Rate (BTU/HR) Displays the furnace input rate in kBtu/hr
Motor HP (1/2, ¾, or 1 MTR HP) Displays the furnace indoor blower motor horsepower
CONFIGURATION
Submenu Item Indication/User Modifiable Options Comments
Fault 1 (FAULT #1) Most recent furnace fault For display only
Fault 2 (FAULT #2) Next most recent furnace fault For display only
Fault 3 (FAULT #3) Next most recent furnace fault For display only
Fault 4 (FAULT #4) Next most recent furnace fault For display only
Fault 5 (FAULT #5) Next most recent furnace fault For display only
Fault 6 (FAULT #6) Least recent furnace fault For display only
Clear Fault History (CLEAR) NO or YES
Selecting “YES” clears the
fault history
NOTE:
Consecutively repeated faults are shown a maximum of 3 times.
DIAGNOSTICS
Subm e nu Item Indication (for Display Only; not User M odifia ble )
Model Num ber (MOD NUM ) Displays the furnace m odel num ber
Serial Number (SER NUM ) Displays the furnace serial num ber (Optional)
Software (SOFTW ARE) Displays the application software revision
IDENTIFICATION