SECUTEST ST BASE(10) / PRO and SECULIFE ST BASE(25)
50 Gossen Metrawatt GmbH
➭ Enter an ID that hasn’t yet been used
and confirm your selection.
The “Create test object” prompt ap-
pears:
QEDIT On/Off
(QuickEdit function, only with
SECUTEST DB COMFORT –
Z853S or feature KD01)
If QEDIT is activated, you can fill
in all of the test object’s fields as
a further step. Refer to operating
instructions for further informa-
tion.
Toggle between device and med-
ical device
Return to results screen
➭ Save the results by pressing the
save key.
The measurement is saved and the test
instrument is ready for the next measure-
ment:
You can send the test results to
a PC on which IZYTRONIQ
software is running. This func-
tion is known as “push-print” and can
be implemented via USB or Blue-
tooth
®
.
Database extension SECUTEST DB
COMFORT (Z853S or feature KD01)
and, if applicable, feature M01 (Blue-
tooth
®
) are required to this end.
Complete information regarding
push-print and a description of the
application can be found in
IZYTRONIQ online help.
To Next Page
Loading...
