Gossen Metrawatt GmbH 49
SECUTEST ST BASE(10) / PRO and SECULIFE ST BASE(25)
(display of the memory screen depends
on the parameter setting in the
SETUP
switch position:
Setup 1/3 > Auto Measurements > At
End of Sequence > “Memory Screen”.
When set to events list, is omitted.)
Show details:
(Consideration of measuring error
depends on the
parameter setting in the
SETUP switch position: Setup 1/3 > Auto
Measurements> Error Considered. > Yes)
Hide details:
Return to the list of test steps
Confirm results:
Return to the memory screen
➭ Press the ID key.
You now have the option of en-
tering a test object ID number. If
you enter an ID here which is not
yet included in the database, a prompt
appears asking you if you want to enter a
new test object.
The ID dialog appears.
Since no test object is selected, a
corresponding note is displayed
when the save key is pressed.
Optional: Display results
To Next Page
Loading...
