Setup
309856A 13
8. Open B (RESIN) fluid valve (about three half
turns). Then open A (ISO) fluid valve.
9. Disengage safety lock, page 11.
A
B
TI3838a
TI3849a
10. Test spray onto cardboard. Adjust pressure and
temperature to get desired results.
11. Apply layer of lubricant over front of gun and lock
ring, or use gun cover to prevent overspray
buildup and ease disassembly. See page 49 to
order lubricant and gun cover.
12. Gun is ready to spray.
CAUTION
Air supply is required for gun actuation. Do not dis-
connect gun air supply until fluid pressure is relieved,
page 17.
To Next Page
Loading...
Need help?
General
