Repair
3A9286B 31
Repair
NOTE: Repair kits are available (purchase separately).
Prepare Equipment for Repair
Always complete the following procedure before
performing any service or repair to the equipment.
1. Follow Pressure Relief Procedure, page 22.
2. Follow Flush the Equipment, page 27.
3. Verify that the equipment is turned off and power to
the system is disconnected before performing any
service or repair procedure.
4. Disconnect all fluid lines.
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury from
pressurized fluid, such as splashing fluid and moving
parts, follow Pressure Relief Procedure when you
stop operating and before cleaning, checking, or
servicing the equipment.
To avoid severe burns, do not touch hot fluid or hot
equipment.
Follow Prepare Equipment for Repair, page 31,
before performing any service or repair to the
equipment.
To avoid injury from fire, explosion, or electric
shock, all electrical wiring must be done by a
qualified electrician and comply with all local codes
and regulations.
Models in Explosive Atmospheres or Hazardous
(Classified) Locations: To avoid injury from fire and
explosion, move the equipment to a non-explosive or
non-hazardous location before performing any
service or repair to the equipment.
Triplex Sales
1-847-839-8442
www.triplexsales.com
To Next Page
Loading...
