Grandstream Networks GWN7602 User Manual

P a g e | 51
GWN7602 User Manual
Version 1.0.15.20
Table 13: Syslog Parameters
Field
Description
Syslog Server
Enter the IP address or URL of Syslog server.
Syslog Level
Select the level of Syslog, 5 levels are available: None, Debug, Info,
Warning and Error.
Log DNS Queries
Check to log DNS Queries.
Logserver
The Logserver page allows the user to configure syslog server on Master GWN76XX controllers in order
to save log messages for GWN7602 on connected external USB drive.
First connect a USB drive to the Master Access point, then configure the parameters and make sure to
start the server in order to collect messages from GWN7602 sending syslog to GWN Master.
Following table gives description for configuration parameters of GWN Logserver:
Table 14: Logserver Parameters
Option
Description
Logrotate File Size
Select the size of file to trigger rotation, if left empty, then the router will use
only the Logrotate frequency rules to trigger rotation.
Default is 5 M. Units can be M (Megabytes) or K (Kilobytes).
Logrotate File Count
Select the Maximum number of rotates files to keep. Default is 56 files.
Logrotate Mode
Choose the time rotation frequency mode (default every 3 hours).
• Every X Minutes (0-59).
• Every X hour (0-23)
• X hour of day (0-23).
• X day of week (Sunday-Saturday) + X hour of day (0-23).
Hours
Enter the number of hours period after which trigger file rotation.
Minutes
Enter the number of Minutes period after which trigger file rotation.
Hour of the day
Enter the hour of day at which trigger file rotation.
Day of the week
Enter Day of the week + hour of day, at which trigger file rotation.
Devices
Select the path (a USB partition) to store collected logs. Required.
Enable Logserver
Enables the Logserver.

Grandstream Networks GWN7602 Specifications

General

Brand	Grandstream Networks
Model	GWN7602
Category	Wireless Access Point
Language	English