Set the gateway for DHCP, and it is better to set the gateway, should be
different that the static IP of the access point and on the same subnet.
Static DHCP
Users can use the feature in order to set static DHCP binding to certain clients, to whom you do not want
the IP address to change.
To configure Static DHCP, please follow below steps:
1. Go under the menu “System Settings ➔ DHCP Server ➔ Static DHCP”.
2. Click button to create a new entry.
3. Enter the name of the device, along with its MAC address and IP address
Figure 38: DHCP Binding
4. Press Save and Apply to submit the changes.
To Next Page
Loading...
