Grandstream Networks GWN7602 User Manual

P a g e | 68
GWN7602 User Manual
Version 1.0.15.20
Automatic Upgrade
Set automatic upgrade every intervals/day/week. The device will
request to upgrade automatically according to the setup time. The
default setting is Disabled
X Hours
Select the time period to check for firmware upgrade.
This field is available when select “Check every X Hours” in
“Automatic Upgrade”
Hour of Day (0-23)
Defines the hour of the day (0-23) to check the HTTP/TFTP server
for firmware upgrade or configuration file changes.
This field is available when select “Check at Hour of Day” and
“Check at Day of Week” in “Automatic Upgrade”
Day of Week
Defines the day of the week to check the HTTP/TFTP server for
firmware upgrade or configuration file changes.
This field is available when select “Check at Day of Week” in
“Automatic Upgrade”
Upgrade Now
Click on button to begin the upgrade. Note that the
device will reboot after downloading the firmware.
Note: Please save and apply your configuration first if there are any
configuration modification.
Download Configuration
Click on button to download the device
configuration file to PC.
Upload Configuration
Click on to select a compressed config file to restore
the config; after succeeding, the device will reboot automatically.
Reboot
Click on button to reboot device.
Factory Reset
Click on to restore the device and all online APs to
factory default settings.
When the GWN7602 is being paired as slave using another GWN76XX Access Point acting as Controller,
users can upgrade their paired access points from the GWN76XX Master Controller.
To upgrade the GWN7602, log in to the GWN76XX acting as Master Controller and go to Access Points.

Grandstream Networks GWN7602 Specifications

General

Brand	Grandstream Networks
Model	GWN7602
Category	Wireless Access Point
Language	English