Grandstream Networks GWN780 Series - Log Management and Ping Utility

To Next Page

To Previous Page

Diagnostics – Logs

Adding a Log Server Address to the logs to be sent to is also supported on the GWN780x(P) Switches.

Log Server Address

Ping

The user in this page can enter the IP Address or Hostname then click “Start”, the results of the ping command will be shown

below.

Ping

Traceroute

Another tool is Traceroute that shows the number of hops, and GWN780x(P) Switches enables the user to run Traceroute

commands right from the Switches WEB UI.