firmware server for upgrading.
Syslog
Syslog Level
Select the level of logging for syslog. The default setting is "None". There are 4 levels: DEBUG,
INFO, WARNNING AND ERROR.
Syslog Server Address. The URL/IP address for the syslog server. If the GXV3240 has network
connection, the phone will send the syslog output to this server address.
Factory Reset. Open and tap on Factory Reset to restore the GXV3240 to factory default settings.
Developer mode. This mode can be used via ADB tool for advanced debugging purpose.
REBOOT
Tap on "Reboot" to reboot the device.
To Next Page
Loading...
