Firmware Version 1.0.3.46
GXV3240 Administration Guide
It is used to enable and select the 1
st
802.1x mode for the phone
system. The supported 802.1x modes are :
TLS
PEAP
TTLS
PWD
The default setting is "Disable".
It is used to enable and select the 2
nd
802.1x mode for the phone
system if the TLS, PEAP or TTLS is selected in the 802.1x Mode 1.
The supported 802.1x mode 2 are :
PAP
MSCHAP
MSCHAPV2
GTC
It is used to fill in the identity information for the selected 802.1x mode.
(This setting will be displayed only if 802.1 X mode is enabled).
It is used to fill in the password for the selected 802.1x mode. (This
setting will be displayed only if the 802.1 X mode is enabled).
It is used to upload the CA Certificate file to the phone.(This setting will
be displayed only if the 802.1 X mode is enabled)
It is used to load the Client Certificate file to the phone. (This setting
will be displayed only if the 802.1 X TLS mode is enabled)
MAINTENANCE/TIME SETTINGS
Assign NTP Server Address
It is used to define the URL or IP address of the NTP server. The phone
may obtain the current date and time information from the server. The
default setting is “us.pool.ntp.org”.
DHCP Option 42 override
NTP server
It is used to set if the phone systems will allow the DHCP offer overrides
the NTP server address setting. If it set to “Yes”, the DHCP offer with
Option 42 will override the phone system’s NTP server address setting.
The default setting is "Yes".
DHCP Option 2 to override
Time Zone setting
It is used to set if the phone systems will allow the DHCP offer overrides
the Time Zone setting. If it set to “Yes”, the DHCP offer with Option 2
will override the phone system’s time zone setting. The default setting
is "No".
It is used to set the local time zone for the phone. It covers the global
time zones and user can selected the specific one from the drop down
To Next Page
Loading...
Need help?
General
