Firmware Version 1.0.3.46
GXV3240 Administration Guide
This is used to configure the event URL when the forward feature is
disabled on the phone.
This is used to configure the event URL when users transfer a call with
blind transfer on the phone.
This is used to configure the event URL when users transfer a call with
attended transfer on the phone.
This is used to configure the event URL when users hold a call on the
phone.
This is used to configure the event URL when users resume a call on
the phone.
This is used to configure the event URL when users log on the phone
successfully.
This is used to configure the event URL when users log off the phone.
This is used to configure the event URL when an account in the phone
is registered successfully.
This is used to configure the event URL when an account in the phone
is unregistered.
It is used to set if the phone system will enable the “CPE WAN
Management Protocol” (TR-069). The default setting is "No".
It is used to configure the Auto Configuration Server’s URI.
It is used to configure the username for the Auto Configuration
authentication.
It is used to configure the password for the Auto Configuration
authentication.
Enables periodic inform. If set to "Yes", device will send inform packets
to the ACS. The default setting is "No".
Periodic Inform Interval (s)
Sets up the periodic inform interval to send the inform packets to the
ACS.
Connection Request
Username
The user name for the ACS to connect to the phone.
Connection Request
Password
The password for the ACS to connect to the phone.
The port for the ACS to connect to the phone.
The Cert File for the phone to connect to the ACS via SSL.