P a g e | 27
IPv6 Settings: Here user can configure the IPv6 address type only for data. If DHCP is selected, the
phone will get an IP address automatically from the DHCP server in the network. This is the default
mode. If Static IP is selected, manually enter the information for IP Address, Prefix Length, DNS Server
and Alternative DNS server.
802.1x mode: This option allows the user to enable/disable 802.1x mode on the phone. The default
setting is disabled. To enable 802.1x mode, select the 802.1x mode and enter the required configuration
depending on the 802.1x mode chosen. The available modes are EAP-MD5, EAP-TLS and EAP-PEAP
Wi-Fi
Tap on "Wi-Fi" to turn on/off Wi-Fi connection. By default, it's turned off.
Preferred Internet Protocol: Selects which Internet protocol to use. When both IPv4 and IPv6 are
enabled, phone attempts to use preferred protocol first and switches to the other choice if it fails.
Tap on “Wi-Fi Band” to set the type of WiFi Band (“2.4G”, “5G” or “2.4G&5G”). The default setting is
2.4G&5G.
Tap on "Wi-Fi Settings" to set up and manage wireless access points. This option is available only
when Wi-Fi is turned on.
- Add Network. If the Wi-Fi network SSID doesn't show up in the list, or users would like to set up
advanced options for the Wi-Fi network, roll to the end of the WiFi list and select “Add Network”.
Then Enter SSID, Security type, password and set up address type (DHCP/Static IP/PPPoE) in the
prompt dialog. The phone will reboot with Wi-Fi network connected.
- Refresh. Press MENU button and select "Refresh" to initiate scan for the Wi-Fi network within
the range.
- Advanced Settings. Press MENU button and select "Advanced".
o Install Certificates. This is to install certificates (previously download/uploaded to the
phone) when connecting to Wi-Fi network requesting SSL certificate.
o Wi-Fi Direct. This is to set up peer-to-peer connection between two Wi-Fi Direct devices
so that they can share data and sync files. Press MENU button and select "Advanced".
Then tap on "Wi-FI Direct", the Available devices will be displaied.
- Wi-Fi Configuration
o Saved Networks: this is to show all the Wi-Fi Networks that are registered on the phone.
To Next Page
Loading...
Need help?
General
