Grandstream Networks GXV3350 Administration Guide

GXV3350 Administration Guide
Version 1.0.3.27
P a g e | 63
to the UCM server to request for recording, and the recording function
will be executed by the server.
 If set to "Record on Broadsoft", then will send the recording feature
code to the Broadsoft server to request for recording, and the recording
function will be executed by the server.
 If set to “Disable”, recording functionality will be disabled during calls.
Enable Auto Record
When Call Established
Configures whether to auto record when a call is established. If set to "Yes",
the call recording will start automatically when the call is established.
Note: If Record Mode is set to “Disabled”, it will not be configured.
Rejected Call
Notification
Specifies whether to enable rejected call notification. Once enabled, a
missed call will prompt on LCD when rejecting an incoming call and the
rejected call will be saved in Call History Missed numbers.
Return Code When
Refusing Incoming Call
When refusing the incoming call, the phone will send the selected type of
SIP message of the call.
Return Code When
Enable DND
When DND is enabled, the phone will send the selected type of SIP
message.
Group Listen with
Speake
Configures whether to enable speaker sound when in a call with
handset/headset. If set to "Yes", the speaker sound is enabled, but you
cannot talk through the speaker.
One-way Call Function
Buttons
Users can configure and customize the call functions in the call interface
during a normal call. The available call functions are: Conf, Hold, Video,
Record, Call Details, MPK.
Note: Users can choose only 2 of these functions to be shown on the call
interface during a one-way call.
Conference Call
Function Buttons
Users can configure and customize the call functions in the call interface
during a conference. The available call functions are: Invite, Hold, Record,
Call Details, MPK.
Note: Users can choose only 2 of these functions to be shown on the call
interface during a conference.
Call Function Button
Display Timeout (s)
Configures the timeout period for call function buttons display. If set to "0",
the buttons will be always displayed. The value range is 0-30 seconds.
Phone Settings/Ring Tone
Auto Config CPT by
Region
Configures whether to choose Call Progress Tone automatically by region.
If set to "Yes", the phone will configure CPT (Call Progress Tone)
according to different regions automatically. If set to "No", you can
manually configure CPT parameters.
The default setting is "No".

Grandstream Networks GXV3350 Specifications

General

Brand	Grandstream Networks
Model	GXV3350
Category	Telephone
Language	English