P a g e | 36
o HTTP/HTTPS username: The user name for the HTTP/HTTPS server if set up on the server.
o HTTP/HTTPS password: The password for the HTTP/HTTPS server if set up on the server.
o Config Server Path: This defines the server path for the provisioning server. It can be different
from the firmware server.
Syslog
Syslog level: Select the level of logging for syslog. The default setting is "None". There are 4 levels:
DEBUG, INFO, WARNING and ERROR.
System log protocol: Select the protocol of syslog (UDP or SSL/TLS).
Syslog server address: The URL/IP address for the syslog server. If the GXV3350 has network
connection, the phone will send the syslog packets to this server address.
System log keyword filtering: Only send the syslog with keyword, multiple keywords are
separated by comma. Example: set the filter keyword to “SIP” to filter SIP log.
System Security
Disable Web Login: This disables web GUI access.
Developer Mode. To enable/disable developer mode.
Revoke debugging authorization. To Revoke access to debugging from all computers previously
authorized
Factory Reset. Restore default settings.
Status
Account Status
This page displays all available accounts on the phone with respective status (Configured/Not Configured
and Registered/Unregistered).
Network Status
This page displays Network status including IPv4/v6 address, subnet mask, gateway, DNS server…
System Info
This page shows system info including Total Memory, Available Memory, Android Version, System Version,
Hardware version, CPU temperature…
Storage Status
This page shows device storage status.
To Next Page
Loading...
Need help?
General
