Grandstream Networks GXW45 Series User Manual

Click on to delete the holiday.
Click on “Delete Selected Holidays ” to delete multiple selected holidays at once.
Email Settings
Email Settings
The Email application on the GXW450X can be used to send out alert event Emails, retrieve admin password, etc. The configuration parameters ca
accessed via Web GUI🡪System Settings🡪Email Settings🡪Email Settings.
TLS Enable Enable or disable TLS during transferring/submitting your Email to another SMTP server. The default setting is “Yes”.
Type
Select Email type.
MTA: Mail Transfer Agent. The Email will be sent from the configured domain. When MTA is selected, there is no need to set u
SMTP server for it, or no user login is required. However, the Emails sent from MTA might be considered spam by the target S
server.
Client: Submit Emails to the SMTP server. An SMTP server is required, and users need log in with the correct credentials.
Email
Template
Sending
Select the email template format to be sent. The “HTML” format is compatible with most mail clients and is recommended. If the m
client does not support the “HTML” format, please select the “Plain Text” format.
Domain Specify the domain name to be used in the Email when using the type “MTA”.
SMTP
Server
Specify the SMTP server when using the type “Client”.
Enable
SASL
Authentica
tion
Enable SASL Authentication. When disabled, GXW450X will not try to use the user name and password for mail client login
authentication. Most of the mail server requires login authentication while some other private mail servers allow anonymous login
which requires disabling this option to send Email as normal. For Exchange Server, please disable this option.
Username A username is required when using the type “Client”. Normally it’s the Email address.
Password Password to login for the above Username (Email address) is required when using the type “Client”.
POP/POP3
Server
Address
Configure the POP/POP3 server address for the configured username
Example: pop.gmail.com
POP/POP3
Server Port
Configure the POP/POP3 server port for the configured username
Example: 995
Display
Name
Specify the display name in the FROM header in the Email.
Sender
Specify the sender’s Email address.
For example pbx@example.mycompany.com.
Table 22: Email Settings
The following figure shows a sample Email setting on the GXW450X, assuming the email is using the default SMTP server of Gmail.

Grandstream Networks GXW45 Series Specifications

General

Brand	Grandstream Networks
Model	GXW45 Series
Category	Gateway
Language	English