Grandstream Networks GXW45 Series User Manual

Figure 49: Edit DOD
Outbound Routes
An outbound route is a set of rules defined by privileges and patterns that the gateway uses to decide the numbers that can go out through the t
and who has the right to use the trunk and trunk to use for an outbound call.
To create an outbound route, Go to Web GUI🡪 Trunks🡪Outbound Routes.
Click on to add a new outbound route.
Click on to edit the outbound route.
Click on to delete the outbound route.
On the GXW450X, the outbound route priority is based on the “Best matching pattern”. For example, the GXW450X has outbound route A with pa
1xxx and outbound route B with pattern 10xx configured. When dialing 1000 for an outbound call, outbound route B will always be used first. This
because pattern 10xx is a better match than pattern 1xxx. Only when there are multiple outbound routes with the same pattern configured, the
GXW450X will use the first pattern matched.
Figure 50: Create Outbound Route
Calling Rule
Name
Configure the name of the calling rule (e.g., local, long-distance, etc). Letters, digits, _, and – are allowed.

Grandstream Networks GXW45 Series Specifications

General

Brand	Grandstream Networks
Model	GXW45 Series
Category	Gateway
Language	English