CS500/IS200-UM-251-9370 3-5
3. PREPARING TO OPERATE THE SCANNER
Connecting the scanner via an IEEE 1394 interface
(1) Ensure that you have an IEEE 1394 interface cable that works with your computer.
Plug the IEEE 1394 interface cable (6-pin) into the IEEE 1394 connector socket situated on the
right-hand side of the scanner unit.
IEEE 1394
connector
IEEE 1394
interface cable
To the computer
IEEE 1394 (6-pin)
connector
Connecting the scanner via an Ethernet interface
(1) Ensure that you have an Ethernet cable that works with your computer.
Plug the Ethernet cable into the Ethernet connector located on the right-hand side of the scanner unit.
Ethernet
connector
Ethernet
interface cable
To the computer
To Next Page
Loading...
