CS500/IS200-UM-251-9370 10-1
10. ADJUSTMENTS USING THE SOFTWARE
10. ADJUSTMENTS USING THE SOFTWARE
10.1 Starting the Software
• Ensure that OPS112 (Scanning Master 21+ Ver 5.22 or later) is installed.
(1) Connect the scanner to the PC using a USB cable and switch on the scanner.
(2) Start Windows (OS).
(3) Start OPS112 (SCANNING MASTER 21+).
(4) Select "About" from the "Help" menu.
(5) Click the scanner icon while pressing and holding down the "Ctrl" key.
Next, click the "OK" button while pressing and holding down the "Shift" key.
Icon
(6) Select "Adjust Scanner" from the "Tools" menu.
(7) Select "Yes".
To Next Page
Loading...
