CS500/IS200-UM-251-9370 8-24
8. DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
8.22 Switching Power Supply Board
Detaching the switching power supply board
(1) Detach the right and left side covers (see Sections 8.1 and 8.2).
(2) Detach the front guide assembly (see Section 8.4).
(3) Remove the four M3L6 binding head screws holding the switching power supply board.
M3L6 binding head screw
(4) Disconnect all the connectors on the switching power supply board.
(5) Detach the switching power supply board from the unit.
Reattaching the switching power supply board
(1) Reattach the switching power supply board in the reverse order in which it was detached.
To Next Page
Loading...
