CS500/IS200-UM-251-9370 10-9
10. ADJUSTMENTS USING THE SOFTWARE
3. Position adjustment
Adjusting offset (origin)
(1) Start the software. (See p. 10-1)
(2) Select "Adjust Position" from the "Adjust" menu.
(3) The following dialog box will appear: Correctly position the offset target chart on the scanner and click
the "Scan" button.
Offset target chart
Use the cursor or keys to enter a value to
adjust level differences between the image sensors.
Use the cursor or keys to enter
the position of the origin.
Values actually used for adjustment
Press the Calculate button to calculate these values.
To Next Page
Loading...
