GRAPHTEC CS500 Series - CIS (Charge Coupled Device Imaging Sensor) Assembly

CS500/IS200-UM-251-9370 8-13
8. DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
8.14 CIS (Charge Coupled Device Imaging Sensor) Assembly
Detaching the CIS assembly
(1) Detach the contact glass assembly (see Section 8.13).
(2) Slide each CIS assembly to the left side, lift it up from the right side, and then detach each CIS
assembly.
(3) Disconnect the flexible cable from each CIS assembly and then detach each CIS assembly.
Flexible cableFlexible cable