CS500/IS200-UM-251-9370 4-6
4. INSTALLING THE SOFTWARE
4.3 Checking the Interface Connection for Windows 2000
The procedure outlined below assumes that the CS500-11 is connected in your system.
The scanner name displayed in the windows is the name of the scanner connected to the computer (CS500-11
is used in this section).
(1) Launch the Control Panel using the Start menu.
(2) The screen shown below is displayed when you click on the “Scanners and Cameras” icon.
Ensure that “Graphtec CS500-11” is indicated here.
To Next Page
Loading...
