CS500/IS200-UM-251-9370 8-17
8. DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
Detaching the front pinch roller cover
(1) Remove the four M3L8 binding head screws and the bushes holding the front pinch roller cover.
M3L8 binding head screw
(2) Loosen the two M3L6 binding head screws holding the front pinch roller cover holding bracket.
(3) Slide the front pinch roller cover holding bracket to the left and then detach the front pinch roller cover.
Slide the front pinch roller
cover holding bracket to
the left.
Loosen the two M3L8 binding head screws.
Reattaching the pinch roller covers
(1) Reattach the pinch roller covers in the reverse order in which they were detached.
To Next Page
Loading...
