This function treats the line drawn with 100% magenta as a cut line separately from the normal
line drawn with black.
The line drawn with 100% magenta can be operated as follow by “Special Color” function in the
iMark software.
The line drawn with 100% magenta is not influenced by position of the image, it can cuts
before the normal line cuts which drawn with black.
The line drawn with 100% magenta can be adjust the cut speed and cut force separately
form the normal line drawn with black.
“Special Color” has the following three functions depending o the aprication.
1. Dashed line :Perforation cuts to lines which drawn with 100% magenta.
2. Plain cut :Half cuts (Kiss cuts) to lines which drawn with 100% magenta.
3. Blade creasing :Creasing cuts to lines which drawn with 100% magenta.
When importing the cut date included the
lines wich drawn with 100% magenta into
the iMark software, the “Special Color”
function is active.
The lines which drawn with 100% magenta
are displayed magenta even on the preview
screen of iMark software
To Next Page
Loading...
