GRAPHTEC F-Mark - Parameters Saved Per File; Unsaved Parameters

- 33 -
2.Parameters which inputted values are saved for each file names.
NOTICE:The inputted values are saved for each file name.
If the same file name used, the inputted values are saved as same file even if the image
date in the file is different.
1
２
３
1.Cut force.
Inputted value is saved for each file name after
press the “Start” button.
2.Cut Length / Attach / Speed in the Die Cutting.
Inputted values are saved for each file name
after press the “Start” button.
3.L / R / Height / Width in the Compensation.
Inputted values are saved for each file name
after press the “Start” button.
3.Parameters which inputted values are not saved.
1
2
3
4
1.Cut blank labels
The inputted value is not saved.
2.Copies
The inputted value is not saved.
3.Cut Length / Gap /Speed / Cut force /
Multiple / Spacing in the Special Color.
The inputted values are not saved.
4.Cut force / Pass in the Die Cutting.
The inputted values are not saved.