3-30
Settings and Measurement
(4)-2 Bar Graph Settings
This section allows you to select the display method of bar graphs.
<Standard> <Center>
(4)-3 Waveform Display Settings
This section allows you to set the display color, line width, and display ON/OFF of each waveforms.
Setting items Description
Bar Graph Settings Standard Displays the bar graph with the reference point set to the bottom of the bar.
Center Displays the bar graph with the reference point set to the center of the bar.
Setting items Description
(1) Color Sets the waveform display color for each channel.
Colors can be set by specifying the RGB values from 0 to 31, or by selecting from 10 default colors.
(2) Width Sets the line width of the displayed waveforms.
Values can be specified from 1 to 8 dots.
(3) Trace Enables/disables waveform display.
ON Enables waveform display.
OFF Disables waveform display.
Data capture can be performed.
①②③
To Next Page
Loading...