3-31
Settings and Measurement
(5) MARK settings
This menu allows you to set marks or icons displayed on the waveforms.
(5)-1 User Mark Settings
You can register a text string to be displayed on the screen as user-defined icons, according to need.
There are eight types of user-defined marks that can be registered.
To display a user-defined icon, press the ENTER key on the Mark on the menu.
CHECKPOINT
• The displayed user-defined icons will also be stored in the captured data.
• There is no restriction on how many icons that can be displayed. However, note that information on
these icons are stored in the data file and will thus effect the data file size.
22 single-byte characters can be displayed when using horizontal scroll.
(5)-2 Mark Display Settings
You can display three types of system indicators, along with user-defined icons.
This sections allows you to enable/disable the system indicator display function.
Thetextstringyouenteredwillbedisplayedher
Items Settings 1 Settings 2 Selections available
User Mark Settings Mark1 to 8 Enter alphanumerics. Up to 30 characters can be used.
Mark Display Settings Start/Stop Mark Display On, Off
Trigger Mark Display On, Off
Alarm Mark Display On, Off
Setting items Description
Start/Stop Mark Display
Indicator that shows when capture started and stopped.
Sets ON/OFF of this indicator display function.
Trigger Mark Display Indicator that shows when trigger was generated and capture started.
Sets ON/OFF of this indicator display function.
Alarm Mark Display Indicator that shows when the alarm was generated.
Sets ON/OFF of this indicator display function.
To Next Page
Loading...