3-34
Settings and Measurement
(6)-3 Between Cursors
This function allows you to save data between cursors, while replaying captured data.
CHECKPOINT
• Data save between cursors can only be performed after you set the saving range with the cursor,
following captured data replay.
For details on data replay, see page 3-68.
CAUTION
• This menu is only enabled while data is replayed.
(6)-4 Save/Load Current Settings
This section allows you to save or load MT100's condition settings.
CAUTION
• This function is only enabled during Free Running.
Setting items Description
Folder Specifies the location where data between cursors is saved.
MEM Saves data in the internal Flash memory.
Folders can be specified in File Operation settings.
USB1 Saves data in the USB memory.
Folders can be specified in FileOperation settings.
File Name Sets the file name when User is set for Name Type.
File Type Specifies the file format used to save a file.
GBD Creates data files in a proprietary binary format.
* Data cannot be altered.
CSV Creates data files in text format.
* Cannot be replayed in MT100.
Name Type Specifies how files are named.
Auto A file name is created automatically.
User Specifies a user-defined name.
SN Creates a file by appending a serial number to the file name.
Setting items Description
Folder Specifies the location where condition settings are saved (or load source).
MEM Saves (loads) settings in the internal Flash memory.
Folders can be specified in File Operation settings.
USB1 Saves (loads) settings in the USB memory.
Folders can be specified in FileOperation settings.
File Name Save Sets the file name when User is set for Name Type.
Load Specifies the settings file to load (file extension is CND).
Name Type Specifies how files are named.
(save only) Auto A file name is created automatically.
User Specifies a user-defined name.
SN Creates a file by appending a serial number to the file name.
To Next Page
Loading...