3-35
Settings and Measurement
(6)-5 FTP Server Settings
This section allows you to make settings to establish a connection to the FTP server in the network.
These settings must be made to allow measurement data to be backed up periodically to the FTP server.
In such cases, specify FTP in DATA menu=>Backup Settings=>Backup Destination (see page 3-23).
CAUTION
• This menu is only enabled during Free Running.
(6)-6 USB Memory
This function is used when you need to remove or exchange USB memory devices.
Follow the directions displayed in the message windows to remove or exchange the USB memory device
(see page 3-47).
CAUTION
• This function is only enabled during Free Running and data capturing.
①
②
③
④
⑤
⑥
Setting items Description
(1) FTP Server Sets the domain name of the FTP server.
(2) Username Sets the login name for the FTP server.
(3) Password Sets the login password for the FTP server.
(4) Port Number Sets the port number of the FTP server.
(5) PASV Mode Sets ON/OFF of passive mode.
ON
Select ON to establish connection to an external FTP server in a firewall-enabled environment.
Off
Select Off to establish connection to an FTP server in a general network environment.
(6) FTP Server Conduct a test to confirm connection to the configured FTP server.
Connection Connection status message is displayed when a connection test is performed.
*The following message is displayed when the connection test resulted with an OK status.
To Next Page
Loading...