3-40
Settings and Measurement
(9)-1 OTHR settings
Setting items Description
LCD brightness Sets the brightness of the LCD backlight.
Available selections are Light, Medium, and Dark.
Screen Saver Automatically turns off the display if the MT100 is not operated within a specified interval.
Available selections are Off, 10, 30 s, 1, 2, 5, 10, 30, 60 min.
Turning off the display frequently using the Screen Saver function allows longer lifetime of the
LCD screen.
Power On Start Sets the feature which initiates measurement as soon as the MT100 is turned on.
Disable Disables the Power On Start function.
Enable Enables the Power On Start function.
Room Temp. This parameter enables room temperature compensation settings when thermocouples are used.
Internal The MT100's room temperature compensation settings are used
(usually, use this parameter).
External
This parameter is set to enable room temperature compensation settings in external devices.
Temp. Unit
Toggles the temperature unit between
°C
and
°F
.
°C Celsius
°F Fahrenheit (the scaling function is compulsorily enabled)
Burn Out Sets a feature which checks sensor burnout in a thermocouple.
Off Disables burnout check.
On Enables periodic burnout check.
CAUTION
During a burnout check, voltage is applied to the MT100.† Therefore, set Burn Out to Off
when MT100 is connected inparallel with other devices to avoid any effect from these voltages.
AC Line cycle Selects the frequency of the AC line used.
50Hz For areas using line frequency of 50 Hz.
60Hz For areas using line frequency of 60 Hz.
CAUTION
This setting specifies the frequency in which noise can be eliminated with the digital filter
function.
Note that the digital filter is enabled when the sampling frequency is set to 500 ms or above.
Date/Time This parameter sets the date and time.
Date/Time Sets the internal clock of the device.
Enter the correct date and time.
Internet This setting is used to adjust the internal clock via the network.
Time *For details, see the next page.
Language Sets the MT100's display language.
Available selections are Japanese, English (US), English (UK), French, German, Chinese,
and Korean.
Return to default settings
Returns all the settings to factory default.
To Next Page
Loading...