GRASS VALLEY KARRERA K-FRAME - Enter a Macro Panel Name

168 KARRERA K-FRAME — User Manual
Section 5 — Switcher Control
Figure 93. Macros Catalog Menu
1. Go to the Macro Catalog menu (press Macro, Catalog).
2. Touch the Macro Register number button of the register you wish to
record into, in the scrolling list.
3. Touch the Record button.
4. Perform the steps you wish recorded into the macro, in the order they
are to be performed, using the Control Panel and/or the menus.
5. Touch the Stop button to end the macro recording.
You can name the macro either before you record it, or after by touching the
name data pad for that macro register to bring up a keypad.
Enter a Macro Panel Name
The “Panel Name” column is provided in the Macro Catalog menu’s,
Macro List pane; four characters maximum. GV Switcher displays that
name in place of the Macro Register Number in the Local E-MEM area
(when the Macro menu is delegated by pressing the
Macro button in that
ME).
1. Select Macros, Catalog in the menu.