90 KARRERA K-FRAME — User Manual
Section 4 — Video Mix/Effects
4. Select a source from the scrolling Source List (right) and touch that
source.
The ME Status display in the Transition area shows the source names of
any key cut signals.
Note Split Key will be shown in the Modifier area display.
Setting Keyer Priority
The GV Switcher system has six keyers per ME so complex stacking is pos-
sible. Keys can be placed between other keys, using key priority.
Note You can also apply the following to the Keyer Secondary Priority Stack when
an ME is in Split Mode.
1. Touch Keyer, Priority (Figure 44).
Figure 44. Keyer Priority Menu, Current Stack Selected
2. If not already set up, turn on the desired keys and arrange them so they
overlap, observing the Program monitor. This will make the changes in
key priority visible. For demonstration purposes, you can use four
preset pattern keys.
To Next Page
Loading...
