KARRERA K-FRAME — User Manual 175
Bus Linking
Give a source table a descriptive Source Table Name or rename a source
table by touching the
Rename button (Figure 95).
Figure 96. Source Tables Menu
Bus Linking Source Substitution Tables
There are 15 configurable Source Tables. Each can be assigned to one, many,
or all bus links once configured in the Source Tables menu (
Figure 96).
A source table (or lookup table) can be configured and applied to every bus
link. This frees up resources and allows a faster more efficient way of
applying the same source substitutions to multiple bus links. Also, you are
able to create named relationships between the source table and the bus
links to which they are assigned.
The Standard Table All Sources 1-to-1 Source Table is the default. One of the
other 15 configurable Source Tables can be assigned once configured.
Linked Source Buttons
Set All One to One—Sets all sources one-to-one.
Set to None—Sets selected source’s Linked Source to none (blank).
To Next Page
Loading...
