OCP 400 Operational Control Panel User’s Guide (v12.0) 25
Chapter 3 - Setup
3.4 Setting up the XCU/Base Station
– Push the SETUP button to open the menu.
– Push the SELECTION button to choose the BS submenu. The BS menu appears. Use
the NEXT button to view subsequent pages.
3.4.1 Accessing the XCU/Base Station menu
Select the MENU item of the BS menu to access the internal menu of the XCU/Base Station.
The menu appears on the XCU/Base Station text and monitoring output.
Menu Selections Function Level Possible values
BS setup
page 1
Monitoring Monitoring output selection S CVBS,R,G,B,Y,EXT1,EXT2,Y/
EXT1,Y/EXT2
-
-
MENU Go to BS menu control S
BS setup
page 2
H Phase Adjustment H-Phase B 0..99
SC Coarse Adjustment SC-Phase coarse B 0,90,180,270
-
SC Fine Adjustment SC-Phase fine B 0..99
BS setup
page 3
Notch Lvl Notch Depth B 0..99
Notch Notch function B On, Off
-
-
Menu Selections Function Level Possible values
BS menu
control
Up Navigate ‘up’ in the BS menu S
-
Down Navigate ‘down’ in the BS menu S
Select Activate ‘select’ in the BS menu S
To Next Page
Loading...