GRASS VALLEY OCP 400 - Detail Button

OCP 400 Operational Control Panel User’s Guide (v12.0) 49
Chapter 4 - Operation
Monotine Filter menu (LDK 500 only)
4.5.11 Detail button
– Press the DETAIL button to open the detail menu.
Menu Selections Function Level Possible values
Soft focus
filter page 1
[LDK 500
only]
Soft Fcs Select soft focus filter B On, Off
Preset Select soft focus presets B Preset 1 .. 5, Var
Radius Set center spot radius B 15..99
View Select view mode B On, Off
Soft focus
filter page 2
[LDK 500
only]
Soft FCS Select soft focus filter B On, Off
Level Set level of grayscale B 0..99
Transit Set transition level B 15..99
Fade Set grayscale color B 0..99
Soft focus
filter page 3
[LDK 500
only]
X pos Set X position of centre spot B 0..93
Y pos Set Y position of centre spot B 0..99
Reverse Reverse filter B On, Off
Asp Ratio Change aspect ratio of centre
spot
B 24..99
Menu Selections Function Level Possible values
Monotone
filter page 1
[LDK 500
only]
Monotone Select electronic monotone
filter
BOn, Off
Preset Select gradient presets B ND0.3/0.6/0.9, Sunset, BlueSky,
Var
Depth Adjust monotone filter depth B 0..99
-
Monotone
filter page 2
[LDK 500
only]
Monotone Select electronic monotone
filter
BOn, Off
-
Red Adjust monotone filter color B 0..99
Blue Adjust monotone filter color B 0..99
Menu Selections Function Level Possible values
Detail
page 1
Dtl Level Detail level S 0..99
Texture Selects Texture level B 0..99
Level Dep Level dependency B 0..99
Noise Sl Selects Noise slicer level B 0..99