GRASS VALLEY OCP 400 - Programmable Function

32 OCP 400 Operational Control Panel User’s Guide (v12.0)
Chapter 4 - Operation
Status page 3
Displays information about gain and black levels, detail, master black, iris and variable gain.
4.2.2 Programmable function pages
This page gives direct access (by pressing the corresponding SELECTION button) to up to 6
programmable functions.
Function page 1
This page gives access to programmable functions 1 and 2.
Function page 2
This page gives access to programmable functions 3 to 6.
☞
Note
☞
Note
Programmable functions that are disabled in the OCP setup menu are not shown. When all
functions on a page are disabled, the entire page is not shown.
EXIT TOGGLE
PREV NEXT
GAIN
50 50 F8.0
BLACK
DTL MBL IRIS
R50 G50 B50
14.1dB
R50 G50 B50
GAIN
Gain R,G and B
values
Black R,G and B
values
Detail function
and value
Variable gain
function and value
Master black
and value
Iris function 
and value
EXIT TOGGLE
PREV NEXT
Gain +
0
Gain - ND Down
ND Up
Clear
Programmable
function 1 up control
Function
value
Programmable
function 1 down control
Programmable 
function 2 up control
Programmable 
function 2 up control
Function
value
TOGGLE
PREV NEXT
EXIT
Var CTemp
30 Off
3200K
Dtl Lvl Knee
Var Gain
0.0 dB
Programmable
function 3
Function
value
Programmable
function 5
Function
value
Programmable
function 4
Function
value
Programmable
function 6
Function
value