GRASS VALLEY OCP 400 - Setting Up the Camera

26 OCP 400 Operational Control Panel User’s Guide (v12.0)
Chapter 3 - Setup
3.5 Setting up the camera
– Push the SETUP button to open the menu.
– Press the SELECTION button to choose the camera setup menu.
Menu Selections Function Level Possible values
Camera
setup
page 1
Videomode Select camera video mode S <various video modes>
SELECT Press to activate selected video
mode
SensMode Select Sensitivity Mode (LDX) S HiQ, Nom, HiSens
—
Camera
setup
page 2
KeyBacking *) Keying Assist Mode S Off, Green, Blue
—
KeyView *) Keying Assist View control S On, Off
Transition *) Keying Assist Transition level S -100 .. 100
*) Only available when camera type and version supports the Keying Assist functionality.
Camera
setup
page 3
HD Ratio Select HD aspect ratio S 16:9, SW
SD Lbox Select SD letterbox function S 14:9,10:9,16:9, Off
SD Ratio Select SD aspect ratio S 4:3, 16:9
Ratio Sel Aspect ratio selection S Extern, MCP
Camera
setup
page 4
Freeze Freeze picture S On, Off
LEDWallFlt Turns LED Wall filter on or off
(LDX cameras)
SOn, Off
Reverse Scan Switches reverse scan on or off S On, Off
Mode Selects Reverse Scan Mode S Horizontal, Vertical, Both
Camera
setup
page 5
Lens Ctrl Selects lens control point S Local, Remote
—
Focus Remote Focus S 0..99
Zoom Remote Zoom S 0..99
Camera
setup
page 6
Iris Pk/Av Iris Peak/Average level F 0..99
Paint Rng Painting range setting F 3 dB, 6 dB
-
VF MENU Go to VF MENU control F
Camera
setup
page 7
Matrix Matrix selection B EBU, Skin, B/W, RAI,
BBC, 1:1, CoolFL, Var1,
Var2, XGL
Mtrx Seq Matrix sequence F M->G, G->M
VAR MTRX Go to VAR MATRIX menu F
SHADING Go to SHADING menu F
Camera
setup
page 8
Max User LVL Sets maximum User level F 0, 1, 2, 3, 4
OnAir LAMP Front On Air indicator F On, Off
OnAir LVL On Air indicator level F 0..99
Power Camera remote power S On, Off