GRASS VALLEY OCP 400 - Page 27

OCP 400 Operational Control Panel User’s Guide (v12.0) 27
Chapter 3 - Setup
Camera
setup
page 9
DiskRec IF Select disk recorder interface
(LDK 8300 only)
SEVS, Std
Combine Selects method of combining
high speed phases for the
viewing output (LDK 8300 only)
S Field, 2-line, 4-line
Tally Lock Tally lock S On, Off
Ext. Iris Extended Iris S On, Off
Camera
setup
page 10
V-Shift Vertical Shift S On, Off
V-Shift Lvl Vertical Shift Level S 0..99
Cam Disable Camera Disable S On, Off
—
Camera
setup
page 11
Rem Audio Remote Audio Select S Loc, Rem
—
Audio1 Lvl Set Audio 1 Level S -22 to -64dB
Audio2 Lvl Set Audio 2 Level S -22 to -64dB
Camera
setup
page 12
V Timing Vertical timing adjustment S 1..1125 (depends on video mode)
Hph Coarse Hphase coarse adjustment S 0..2749 (depends on video mode)
CVBS SCph CVBS Subcarrier phase
adjustment
S
Hph Fine Hphase fine adjustment S
Camera
setup
page 13
Fan Ctrl Remote camera fan control S Off, Max, Var
—
—
Cam Temp Shows camera temperature S Degrees Celcius or Fahrenheit
Camera
setup
page 14
AptFlwIris Selects Aperture Follow Iris S On, Off
—
—
Noise Red Selects Noise Reducer Mode S Off, 1, 2, 3
Menu Selections Function Level Possible values
VF MENU
control
Up Up menu (also with rotary) S
-
Down Down menu (also with rotary) S
Select Select S
Menu Selections Function Level Possible values