GRASS VALLEY OCP 400 - Connectors; Power Connectors

OCP 400 Operational Control Panel User’s Guide (v12.0) 55
Chapter 6 - Connectors
Chapter 6
Connectors
6.1 Power connectors
6.1.1 Power input connector (DC input)
Caution
The input voltage must not exceed +17 VDC.
6.1.2 Power output connector (DC output)
Caution
A maximum of 5 operational control panels can be looped through. An optional loop through
power cable (art. nr. 8926 591 00501) is available at Grass Valley.
Pin Description
1GND
2 no connection
3 no connection
4 +12 VDC input (nominal)
It is recommended to use Grass
Valley’s LDK 5903 power supply unit
to power the OCP.
XLR 4-pin male
(panel view)
3
2
4
1
Pin Description
1GND
2 no connection
3 no connection
4 +12 VDC output
This socket supplies the input DC
voltage (+12 VDC) for other OCPs
XLR 4-pin female
(panel view)
3
2
4
1